After years of traffic, the timber floors are shedding their gloss. To renew them, fining sand as well as re-opening may be necessary. Right here’s the best ways to sand as well as varnish a timber floor.
Cut the film of paint in between the plinth and also the wall surface with a energy blade. Area a tiny board against the wall surface so as not to harm it. Remove the skirting board with a nail bar or screwdriver versus the board. Spread the plinth at the area of each nail. Number skirting boards as you remove them to assist in reinstallation. Eliminate the nails.
To sand a floor over its entire surface area, use a drum sander. Begin making use of # 80 paper. Starting from the end of the workpiece, push the sander towards the floor battens to about 6 “from the wall surface. Increase the drum while keeping the sander moving. Return to your beginning point as well as start the following section midway along the width of the first area. When the surface area has been completely sanded, change the # 80 paper with # 120. Repeat the procedure utilizing # 150 paper to remove the marks left by the previous sanding. It is very important to operate in a well ventilated room. If needed, you can rent out some devices or hire experts. Otherwise, make certain to comply with the instructions,
Utilize a perimeter sander, and the same sanding paper numbers in the order recommended in the previous action, to sand along the wall. Scratch hard-to-reach locations, such as radiators, with a paint scrape. At these same places, sand by hand.
Start by using the varnish on the edge of the area utilizing a brush that is suitable for the item made use of. After that use an applicator advised by the supplier as well as spread out the varnish over the rest of the floor. Let the time advised by sablage de plancher Laval .
To complete the work, sand the surface area using a completing sander with a fine-grained unpleasant pad.